Ceiling fan Maintenance Tips

0
180
ceiling-fan-maintenance

Do you experience some wobbling with your fan? Try tightening all of the blade and blade iron screws until they are snug. It is essential to turn off the power and also check that the hanger ball is properly seated. Then it is necessary to change the direction and to reduce the noise if it is too loud. Maintaining ceiling fans are very important in your homes as they make you cool during summer and keep you warm during winter. It can also help to avoid potential safety hazards in case of faulty fans if your fan got damaged maintaining is very easy and simple task. Ceiling fans are the most important item to consider for maintenance.

Tips for maintaining the ceiling fan:

  1. Clean the fan:

You need to keep the fan’s blade neat and clean so it can run smoothly for a long time. It is a good idea to use the vacuum brush to carefully clean the top and the bottom portion of the blades. Sometimes the blades may be filled with a thick layer of dust so just follow up with a damp microfiber cloth and wipe all the areas of each blade.

You can also use a feather duster or other type of dry duster after the blades to make it dry. Gently use these techniques to clean the fan so don’t bend the blades and never use any harsh cleaner on the blades. It is also essential to clean the vents and light fixtures if any are on the ceiling. An excess amount of dust can make the fan’s motor too hot and the blades will begin to wobble.

  1. Make sure that the screws are tightened:

If you fan produces any noise or if it shakes then you can fix the problem by simply using the screwdriver to tighten all the screws used in the fan. Just remove the screws holding the housing around the fan’s bracket with a driver, locate at the bolts and nuts to tighten it. Make sure that the screw attaches the blades to the blade mounts and to the fan motor are tight.

If the still produce wobbles, then check the blade alignment by keeping the tape measure against the ceiling. If anyone of the blade is off, you might be able to slightly bend the metal blade to align it. Sometimes while the fan is running, it generates vibrations that may loosen some of the screws. So it is important to detect loosen screws through a noisy or shaky fan, simply use a screwdriver to tighten back the screws.

  1. Lubricate the fan:

Some ceiling fans require timely lubrication to operate smoothly. So you can apply oil to your squeaky ceiling fan to fill the hole that is located on the top side of the motor. Gently turn off the fan and wait for some time to completely stop. Locate a small hole in the upper section of the motor and pour few drops of oil into the hole.

If the fan makes odd noises or if creates a burning smell when it runs, then it is necessary to lubricate it. Wipe any excess oil off the exterior of the fan with a clean damp cloth; turn on the fan to test it. It should be able to run quietly and smoothly, don’t ignore the noise and smell coming from the fan. Because it can shorten the life of the fan’s motor or potentially cause an electrical fire.

  1. Check for movement:

It is very essential to check the movement of the fan blades just to verify whether it creates wobbling or vibrating noise. Sometimes wobble may be because of the loose bolts and screws. The blades can hang loosely with continued usage and causes undue noise. The center portion of the fan should not make any side movement while the fan is running; if it does then the fan needs to be balanced. When you fix the fan on the ceiling just note that all the blades are properly arranged, if something is missing then fit the sufficient number of blades. You should not bend the blades while cleaning with a cloth or vacuum cleaner. It should be perfectly mounted on the top of another.

Disclosure:

With proper maintenance, your fan can run for a long time without any issues. Now you know the ceiling fan maintenance and cleaning tips, so you can easily avoid any kind of ceiling fan repairs.

LEAVE A REPLY